HOW FORMULAI WORKS

From Active Ingredient to a Lab-Ready Tablet Formula.

FormulAI combines public drug reference data and powder physics to help you screen excipients, choose a manufacturing route, and prepare trial batch sheets before stepping into the wet lab.

STEP 01

Start with a Brand Name, API, or Basic Powder Profile

Search a marketed reference drug to pull its publicly listed inactive ingredients, or enter your active ingredient directly. Even if full laboratory COA measurements are not available yet, you can select how your powder looks and flows so you never get stuck on missing data.

DailyMed RLD
Public Core Inactives
USP / Ph. Eur.
Monograph Baselines
3-Tier Fallback
Zero Missing-Data Lock
Flexible Starting Inputs → Unified Tablet Profile
1. Brand Drug
FDA DailyMed Excipients
2. API & Lab COA
Density & Particle Size
3. Powder Habit
Missing-Data Archetype
↓
Baseline Tablet Profile
API Dose + Reference Excipients
Automated Process & Compatibility Guardrails
Candidate Blend
Dose, Flow & Heat
Rule Engine Screen
✕
Incompatibility Blocked
Amine API + Lactose (Discoloration Risk)
✓
Validated Process Route
Direct Compression, Dry or Wet Granulation
STEP 02

Choose the Right Process and Catch Chemical Clashes Early

Based on your drug dose, powder flow, and moisture or heat sensitivity, FormulAI recommends whether to use Direct Compression, Dry Granulation, or Wet Granulation. At the same time, it screens your blend for common chemical incompatibilities so reactive excipients are flagged before you mix a single batch.

STEP 03

Characterize Powders with the SeDeM Engine, Even When Lab Data Is Missing

FormulAI evaluates every ingredient using the SeDeM expert system, normalizing physical powder properties (bulk and tapped density, Carr's Index, Hausner ratio, inter-particle porosity, cohesion, flowability, and compressibility) onto a unified 0 to 10 readiness scale alongside FDA Inactive Ingredient Database (IID) safety limits and USP / Ph.Eur. / IP baselines.

What Happens When Physical Lab Data Is Missing:
1. Tier 1 (Measured Lab COA): If you have laboratory Certificate of Analysis data, enter your exact bulk density, tapped density, and micron particle size directly.
2. Tier 2 (Behavioral Powder Archetypes): If lab testing is not complete, select how your powder looks and behaves (such as cohesive needle crystals, fine electrostatic powder, or free-flowing granules) to load validated baseline SeDeM parameters.
3. Tier 3 (Conservative Worst-Case Fallback): If no physical data is available at all, the engine automatically assumes conservative worst-case bounds (poor flow, low compactibility, and high sticking risk) so your formulation is designed with safe excipient margins.
12-Parameter SeDeM Powder Readiness Radar (0 to 10 Scale)
Bulk Density
Compressibility
Tapped Density
Flowability
Cohesion Index
Carr's Index
Unoptimized API Alone
Balanced Blend (Target ≥ 5.0)
Real-Time Trade-Off Simulation & 100% Mass Balance
Tablet Hardness
Plastic + Brittle Bonding
Target: 95 to 145 N
Disintegration Time
Rapid Water Wicking
Target: ≤ 8.0 min
100%Auto-Balanced
Powder Flow & Die-Wall Lubricity
Prevents Punch Sticking Without Hydrophobic Over-Coating
STEP 04

Simulate Powder Physics and Non-Linear Excipient Interactions

Rather than relying on black-box guesswork, FormulAI models the physical mechanics of your powder blend before compression to predict how the composite formula will behave on a tablet press.

1. Composite Powder Characterization: Calculates how your high- or low-dose API shifts the overall blend's density, flow index, and compactibility, revealing whether the powder will bridge in the hopper or cap upon ejection.
2. Non-Linear Excipient Trade-Off Modeling: Captures real-world physical trade-offs, such as how increasing binder improves tablet hardness but slows down water penetration, or how over-lubricating with hydrophobic stearates coats particles, softens the tablet core, and delays disintegration.
3. Automatic 100% Mass Balance & Sweet-Spot Optimization: As you adjust binder, disintegrant, and lubricant ratios, the primary filler automatically rebalances the tablet to 100% of target weight, while the mixture solver finds the operating window where hardness, disintegration time, and powder flow simultaneously meet target specifications.
STEP 05

Export Your Lab Batch Sheet and Request Physical Trial Samples

Once your blend meets target specifications in simulation, generate a structured experimental batch sheet in PDF or CSV format with exact percentage and weight breakdowns for your laboratory trials. You can also request 100g, 500g, or 1kg physical samples of specialty excipients directly from your workspace to test the formula in your wet lab.

From Digital Simulation to Wet-Lab Evaluation
PDF & CSV
Lab Batch Sheet
  • • Exact % & mg Weights
  • • 5-Run Trial Matrix
  • • Target Spec Ranges
✓ Ready for R&D Lab
↓
Physical Trial Samples
100g • 500g • 1kg Packs
Specialty Excipients for Wet-Lab Verification
Individual Plan: $0 Free Forever • Unlimited Active Projects

Ready to simulate your next formulation?

Create your free individual account and start building with unlimited active projects.